ExelTech ICX Especificaciones descargar pdf (Pagina 11)

Mounting location is critical to performance and life span of the

inverter. Heat and moisture are the two worst enemies of any

electronic device. Therefore, when choosing a mounting location,

consider the following requirements listed in order of importance:

Invertermustbeshelteredfromtheelements.Selectaclean,dry

location.

Inverter requires adequate ventilation for cooling. With proper

cooling, the inverter will operate efficiently and meet its published

ratings. All models can be mounted in several positions. Best

position, with fan down. Second best, horizontal. Third, vertical

with fan up. Least preferred, upside down.

Inverter should be mounted as close to the battery as possible.

Shorter wire has less resistance, which translates to increased

efficiencies.

An in line fuse is recommended, to protect the battery and wiring to

the inverter. This fuse should be located very close to the battery

positive (+) terminal. To select appropriate size fuse, consult the

"Rated and Peak Current" table in appendix "A".

Disconnect the

charger and inverter are off.

Make DC input connections to the inverter as illustrated in

“Appendix C”.

(Optional) Using 12-18 AWG wire, make Remote On/Off

connection from the rear panel terminal labeled “REMOTE” to one

pole of a small toggle switch. Then from the other pole of toggle

switch, make a connection to battery negative (-).Make sure the

toggle switch is in the off position.

Reconnect grounded terminal of the battery.

INSTALLATION (Location)

INSTALLATION (Wiring)

terminal of battery and make sure thegrounded

Page10

MCX/ICXINSTALLATION ANDOPERATIONMANUAL

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

ExelTech ICX Especificaciones Pagina 11